CipherLab 1562 Guida Utente Scaricare il pdf (Pagina 26)

ScanMaster User Guide

1.9 EFFECTIVE DECODING AREA

By default, the effective decoding area is 100% covered by the scanned area. However,

you may narrow down the decoding area to prevent reading the wrong barcode when a

number of barcodes are printed closely. The scanner will only read barcodes that appear

in the effective decoding area. Select the check box of “Centering Window” and select the

percentage to narrow down the decoding area. For example, read “Left 10%” and then

“Right 30%” for the scanner to decode barcode “A” only.

1.10 TRANSMIT BUFFER (1560/1562/1660)

By default, transmit buffer is enabled and for use when the scanner is out of range. Upon

reading a barcode successfully within range, the scanner responds with one short beep

(high tone) and its LED indicator becomes solid green and goes off quickly. However, the

host computer may not receive the data immediately if getting out of range.

 For 1560/1562 with 4 KB transmit buffer, it can ignore the transmission status and

keep on reading barcodes until the buffer is full.

 For 1660 with 1 KB transmit buffer, it can ignore the transmission status and keep on

reading barcodes until the buffer is full.

Transmit Buffer Enabled

 When transmit buffer is enabled and the scanner is out of range, the scanner will respond with

two short beeps, high-low tone, upon reading a barcode successfully.

 When transmit buffer is full, the scanner will respond with one long beep (low tone) and its

LED indicator will become solid red and go off quickly. You are advised to get back to range.

Transmit Buffer Disabled

 When transmit buffer is disabled and the scanner is out of range, the scanner will respond

with one long beep (low tone). You are advised to get back to range.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

Nessun commento

CipherLab 1562 Guida Utente Pagina 26